In this post, I’ll walk you through the various aspects of the best oil additives for noisy lifters to help you make an informed buying decision.

Moreover, I’ll also be taking questions from my clientele as well as readers to help them clear their doubts on the best additive to quiet lifters.

I highly recommend you to go through these FAQs at the end of the post before making a buying decision especially if you’re a newbie or a first-time buyer.

Does it make sense?

So, before we start our in-depth discussion, allow me to ask you a simple question, What is the best oil additive to stop engine knocking?

So, without further ado, let’s begin…

Today, I’ll be presenting to you some of the best product recommendations for the best oil additives for noisy lifters.

On top of it, I’ll also through light on whether synthetic oil will quiet noisy lifters or NOT.

If you own a car for some time, then you would be well aware of the fact that noisy lifters can cause damage.

Driving for a long time with odd noises can never be a comfortable experience for anyone.

If the noise is too loud then it may cover up the important sounds and can even force you to lose your focus.

Moreover, it would be difficult for you to enjoy your favorite music while you’re driving to your office.

However, ignoring the lifter noise for a long time can cause serious damage to your lifters.

In the worst case, it may lead the entire engine to behave abnormally.

So, what’s the solution?

Well, the solution is simpler than you can even think of.

All you need to do is to figure out the ways to fix noisy valve lifters.

Oil additives can help you in more than one way to get rid of your noisy lifters.

But, at the same time, the selection of oil additives can play a crucial role in fixing noisy valve lifters.

The market is flooded with oil additives and selecting the one that can serve your purpose can be a bit tricky at times.

So, you need to be very careful while selecting an oil additive.

A wrong selection of oil additives can further complicate the situation.

However, you don’t have to worry at all, we’ve done all the hard work for you.

All you need to do is to take ACTION.

Before we discuss the parameters that you need to keep in mind while doing the shopping for oil additives, allow me to throw some light on valve lifters and why they produce a tapping noise.

What are the valve lifters on a car?

Valve lifters are cylindrical in shape and are used to lift pushrods.

The valve lifters apply adequate pressure to open the valves.

For the optimum result, the entire mechanism, known as the valve train, needs to be lubricated on a timely basis.

For lubrication purposes, the lifters have tiny holes on the sides to let in the motor oil.

The valve train is meant to keep the engine as quiet as possible.

There are many types of lifters and each one has its own way of working and dealing with noise.

Let’s discuss each one of them in detail.

Most of the passenger cars have hydraulic valve lifters. They are quite convenient as well as self-adjusting, so dealing with them wouldn’t be a tedious task for you even though you’re a first-time buyer.

The other one on the list is the solid lifters. As compared to the previous lifter, they are less noisy, but at the same time, you may need to adjust them manually at times. The solid lifters are great for racing engines.

Last on our list is the roller lifters. You can position them between the hydraulic valve lifters and solid lifters. The good thing about these lifters is that they can be mechanical or hydraulic. As the name suggests, the rollers are supposed to reduce the friction between the camshaft and the lifter resulting in a reduction in the noise.

The easiest way to deal with the noisy lifters is to take your car to the mechanic.

After checking your car, the mechanic will inform you whether he needs to adjust the valve lash or swap out a bent pushrod.

In almost all cases, a trip to the mechanic will definitely solve the problem related to noisy lifters.

What causes noisy lifters?

If you’re a non-technical guy like me who doesn’t have much knowledge of lifters, then it would be really difficult to figure out the source of the problem.

However, keeping track of certain things can help you to tackle the problems related to the lifter such as the lifter tick sound in a better way.

All you need to do is to keep a close eye on some of the culprits that can cause noisy lifters.

Once the lifters have become old, you don’t have many options, but to replace them with the newer ones.

Nonetheless, the other two causes can be dealt with to achieve the epitome of silence.

Though it seems that fixing the first cause is quite easy still it is the one that causes the maximum problem.

The selection of good oil is important for a healthy and long life of the engine as well.

Make sure the oil you’re using is neither too thick nor too thin. In fact, it should be good enough to pass through the tiny holes on the side of the lifter.

If the oil is too thick then it will not pass through the tiny holes resulting in an increase in friction.

The increase will not only lead to noisy lifters, but it may also increase the temperature a little bit.

On the contrary, if the oil is too thin, it won’t provide proper lubrication as well as padding.

As a result, the overall performance of the engine will decrease because of the metal parts rubbing against each other and getting damaged.

So, in short, use the best oil additives to help your engine remain healthy for a longer duration.

Of course, it is equally important to abide by the manufacturer’s instructions.

Well, we shouldn’t forget that we’re here to find the solution to the dirt accumulation in the valve train, so let’s find the product that can help us fix the issue.

To be honest, it is almost next to impossible to negate problems such as dust accumulation because it is bound to happen as your engine becomes old.

The best thing that we can do is to clean the dirt on a regular basis.

At the same time, we can also reduce the intensity at which the dirt accumulates in the car’s engine by selecting the best oil additives for noisy lifters.

Things You Need to Look for in Oil Additives

I follow a few steps to narrow down on the products and if you’re an avid reader of this blog then definitely you would be aware of this.

Let’s face it, selecting the best product that not only caters to your need but also is under your budget is not so easy in today’s digital world where advertisement pops up from here and there forcing you to make impulsive buying.

Well, I’m not here to blame online ads which know the keywords that you’re searching for and show you the ads accordingly.

What I do is that I select the parameters first and then see which products sync well with them.

I keep on narrowing down the products until I find the one that performs really well on all the parameters that I’ve considered.

Since I’m a soundproof consultant, I test the performance of the products by referring them to my clientele, and if everything goes fine I refer the same products to my readers who are from across the globe.

It goes without saying that the entire process is tedious as well as time-consuming, and so I would suggest you should definitely take advantage of the end result.

Does it sound good?

Well, without wasting much time, let’s discuss each of these parameters in detail.

There are quite a few types of oil additives including oil thinners, thickeners, and flushing agents.

However, our discussion will revolve around the one that you’ll need to quiet your noisy lifters.

Any guess?

They are none other than oil stabilizers. The unique thing about these stabilizers is that they can break down the debris inside the engine while preserving the properties of the oil that you’re using, interesting, isn’t it?

So, are you ready to shop for your best oil additives for noisy lifters?

Thickness

If you’re a first-time buyer or a newbie, then chances are high that you’ll look for oil additives with maximum thickness.

It had happened to me in the past and there are many out there who could correlate with the scenario.

But, here is the trick, the thickest oil may not always be the one that will serve your purpose.

As I mentioned the oil should be thick enough to pass through the small holes of the lifters, failing to do so may lead to an increase in friction between the metal parts.

I highly recommend consulting your engine manufacturer’s site and instructions.

At times, brands also suggest the oil additives that suit their products.

 The good thing about the oil additives that made it to our list is that they will not change the thickness of your engine oil, so all I can say is you don’t have to worry at all. 

Therefore, you can consider using any one of them if it caters to your needs.

However, as a word of caution, it’s always good to check with your car manufacturers.

Clearing and Preventing Debris

If you’re new to the world of soundproofing, then let me tell you, the primary purpose of any oil additive is to clear the debris as well as rust from the valve train.

Furthermore, a good oil additive also prevents dust and debris from occurring in the future.

The good thing about applying oil additives whenever you change the oil is that the oil additive will circulate wherever the oil is after your car’s engine runs for a while.

On top of it, oil additives will flush the pipes as well.

As a result, the engine will be completely cleaned, and you can expect the performance of the engine to shoot up as well.

Engine Performance Optimization

If you own a car or rather any vehicle, then you would be well aware of the importance of engine performance optimization, right?

I’m assuming that now you know that oil additives clean the engine and also take care of the engine from within, so you can expect an oil stabilizer to enhance the performance of your engine.

And, it is equally important to know whether your oil additive is doing the job in the correct way or not, and you know what, it is really easy to figure out how your oil additive is performing.

If everything is fine and your oil additive is doing a great job, then you’ll see a notable reduction in the friction.

However, it’s highly advisable that you shouldn’t always rely on the manufacturer’s claim but rather do some research to reach out to a conclusion.

As you all know most, brands want to be in the limelight as well as present themselves in the best possible manner, so you should always look for users’ opinions.

The easiest way to get the best out of the users’ opinions is by either asking your friends and family members or by reading some product review posts.

It will work either way for you.

Chemical Composition

You’re lucky if the manufacturers are making the chemical composition of their oil additives available.

You can easily check the chemical composition of the oil additives that you’re planning to buy.

At the same time, it will also give you a sense of belonging and trust as well.

If you’re a first-time buyer, then let me tell you, that most of the oil additives are composed of mineral oil or petroleum distillates.

You may want to see some other ingredients as well in the chemical composition of oil additives such as zinc and phosphorous as both are performance boosters

Price

Until and unless you’re really on a shoestring budget, I don’t think price by any means is going to influence your buying decision at all.

Most of the oil additives that made our list of “best oil additives for noisy lifters” are less than the 20-dollar mark.

And, you know what, all you need is a bottle per tank of oil.

Of course, there are a few exceptions made to my list, and just for your information, the costly product that we’ve to offer you will not cost you more than $50.

Needless to say, the price is well-sufficed by the quality and benefits that these high-end oil additives come with.

Best Additives for Noisy Lifters

I hope you’ve enough information now to decide whether you want to buy a particular oil additive or not.

All I can say is, that these oil additives are of high standards, and definitely, will do the job for you.

Bar’s Product RISLONE Engine Treatment for Noisy Lifters

Rislone engine treatment is one of the best oil additives on the market in case you’re looking for an instant result.

One bottle (8.4-inch) is more than enough for 4-6 quarts of oil as it holds 16.9 ounces of additive.

However, if you’re looking for oil additives for bigger capacity, then I would recommend you to use a bottle for every 5 quarts of oil, and you are set for the next oil change.

Can it be easier than this?

However, to get the best out of the RISLONE oil additives I would suggest you should remove debris and quiet lifters.

Moreover, it would help you to enhance the overall performance of the engine as well as reduce friction.

On top of it, you can use it on any vehicle that has 3 to 10 cylinders and runs on either gasoline or diesel.

Though you can add RISLONE oil additives at any time to your oil still I would recommend you should do it when you’re changing your engine oil.

Even though you’re on a shoestring budget you can easily afford Rislone oil additive as a single bottle will not cost you more than 10 dollars.

Unlike some other oil additives, you don’t have to wait longer, Rislone starts removing gum, sludge, and deposits from your engine, the time you install it.

Don’t worry, it will not plug the oil passage while expediting the cleaning process.

Liqui Moly Hydraulic Lifter Additive

It goes without saying that Liqui Moly is one of the most sought as well as a trusted brand.

Can you believe that their hydraulic lifer additive can get you 10 ounces of product in less than 10 dollars?

Isn’t it interesting to see what all you can get in less than 10 dollars?

Like any other good oil additive, it will help you to get rid of your noisy lifters by clearing the rust, specks of dirt, etc. along the valve train.

Like the aforementioned product, it will not affect the viscosity of your engine oil which is definitely expected from one of the best oil additives available on the market.

The good thing about the Liqui Moly products is that you can use them on different types of engines such as diesel, gasoline, and turbo.

When you’re applying it to the oil keep in mind, that a 10-ounce bottle will do for up to 6 quarts.

Depending upon your requirement, you can select from different types of packs such as double or a dozen sizes that it comes in.

In short, it comprises all the ingredients that one expects in a good oil additive.

This hydraulic lifter additive performs as per its reputation.

 On the downside, I would never recommend you to use it for the 2 wheelers that use wet clutches. 

If used properly, you can find an enhancement in your gas mileage as well.

Marvel Mystery Oil the Original Oil Enhancer and Fuel Treatment

Marvel Mystery Oil has been in the market for quite some time, and definitely, they are a good brand.

Well, 16 ounces of their Original Oil Enhancer & Fuel Treatment, you can at somewhere around 10 dollars which is definitely a great deal.

It comes in two packages either get it in a 2-pack, a 32-ounce bottle, or a 6-pack of 32-ounce bottles whichever is feasible for you.

The USP of the Marvel Mystery Oil is that it contains tricresyl phosphate, a phosphorus compound, which plays a crucial role in cleaning your engine.

Once the engine is thoroughly cleaned, you’ll notice a reduction in the friction leading to improvement in the performance.

For the optimum result, I would recommend you use oil to additive ratio of 4:1.

That means if you’ve got a 5-quart capacity, then you can put in 4 parts of oil and 1-part additive.

On top of it, you can also use it for the fuel treatment purpose.

All you need to do is to pour in 4 ounces for every 10 gallons of fuel.

Moreover, if you’re interested in stocking the Marvel Mystery Oil, then the best option to consider would be 1-gallon bottles or a 4-gallon 4-pack.

If I say this mystery oil would also save money for you, would you agree?

Well, the oil will pass through the engine smoothly and without obstacles or debris, so the oil changing duration will automatically become longer.

The company has been serving its customers since 1923, and its expertise lies in combating deposits on carburetors which may be the result of poorly refined gasoline.

Some of the reasons for noisy lifters are caused to valve sticking, gum build-up, and clatter, and the good news is that the Marvel Mystery oil will take care of these problems.

So, all in all, an oil additive on which you can rely to tackle the noisy lifter problem.

Red Line Break-in Oil Additive with Zinc

Well, if you’re looking exclusively for an oil additive that will clean your engine to a great extent, then definitely, Red Line oil additive is one such product to consider.

Definitely, it will cost you around 20 dollars but in return, you’ll be an additive that has the combined power of zinc as well as phosphorous.

The aforementioned elements will tackle the noisy lifters in the best possible way, and there is a reason for it.

It goes without saying that both phosphorous and zinc will bring about huge performance improvements.

On top of that, you don’t have to worry at all about the overall performance of the engine because its anti-wear component will take care of the valve train very well.

As a result, you can expect the engine to be quieter on startups as well as during drives.

Moreover, the engine will also maintain a lower range of temperature, so the chances of oil breaking down at high temperatures are quite low.

As compared to the oil additives that we discussed so far, Red Line Break is cost-effective as one 16-ounce bottle is enough to treat 12 quarts.

It wouldn’t be wrong if I said that you’ll be able to service two engines with a single bottle.

It is highly compatible and you can use it for almost all types of motor oils.

So, what are you waiting for?

BestLine Premium Synthetic Engine Treatment

If you’re in search of a pre-cleaned additive, then definitely your quest will end at BestLine Premium Synthetic oil additive.

Like other additives that we discussed so far, Bestline will also restore and ensure proper oil circulation by breaking apart the rust and debris.

Furthermore, you can expect an enhancement in engine performance.

The additive is known to reduce friction, temperature, and wear.

 Bestline Synthetic oil additive virtually eliminates the noise by coating metal parts with a protective layer of molecules. 

As a result, you can expect a reduction in the harmful emissions from your car.

If you REALLY care about the environment and want it to be a better place for the coming generation, then why not use Bestline?

Like most of you, I also want a reduction in noise pollution, and the good news is that this product does it for you.

If you’re eager to do something for the environment, then all you need to do is spend somewhere around 20 dollars or so.

You can use it with almost all types of oil by replacing 10-15% of the oil with this oil additive.

Are you READY to try Bestline oil additive?

BestLine Premium Synthetic Diesel Engine Treatment

The BestLine Premium Synthetic oil additive is almost similar to the previous one, the only difference is this one is diesel-specific.

The price is also the same along with the packaging.

Well, if you own a car that has a diesel engine, then definitely you should try this oil additive.

All the features that we discussed in the previous one are applicable to this oil additive.

Needless to say, you’ll need to replace 10-15% of your oil with this additive.

Definitely, just like the previous one, this oil additive will also decrease temperature, friction, harmful emissions, and wear.

Zmax 51−212 Engine Formula

Well, to be honest, Zmax 51-212 Engine Formula packaging is definitely going to grab your eyeballs, but I know we’re NOT here to discuss either the aesthetic appearance or the cool packaging, right?

Rust and debris definitely act as a hurdle for the free flow of oil. Moreover, rust not only floats inside the engine but can also get layered on its inner pathways.

To deal with such a problem, this micro-lubricant particle is used.

So, what it does?

Well, it breaks the rust particle to clear the obstacle and restore the free flow of the oil.

Needless to say, this additive is known to give the engine a thorough cleaning.

It acts as a lubricant and reduces the friction between the metal parts.

As a result, the individual parts will be protected against wear, and the temperature will be under control.

All these things will result in a long gap between the oil change as well as enhance the lifespan and durability of the engine.

Here comes the treat, a single 12-ounce bottle of this zMax product will be enough to cover 7 quarts of oil.

What if, your car’s tank capacity is more than that?

No need to get worried, simply add 2 ounces per extra quart.

Trust me, even though you’re on a shoestring budget, you can easily afford this oil additive as it will cost you somewhere around 20 dollars.

Archoil Ar9100 Friction Modifier

So, here comes the most awaited product. Archoil AR9100 is definitely the one that you should try in case you’re not on a shoestring budget.

Though the product is costlier one still the quality and benefits that it comes with suffice for the price.

The company markets this product as an oil additive for all vehicles.

Needless to say, it performs all the tasks that you expect from a high-end oil additive.

Similar to other high-quality oil additives, it will also clear out the rust and reduce engine noise and temperature.

Moreover, it will reduce the wear of metal parts, and thus, you’ll find an increase in the lifespan of your engine.

Well, I’m not done.

The best thing is yet to come.

Moreover, the package contains 16 ounces of the product, which should be enough to use on 13 quarts of oil.

The various components of the engine are protected

But, at the same time, if you’re planning to apply it on gear and hydraulic oil, then you should use 3.2 ounces per quart.

What Causes Lifter Tick?

Well, lifter ticking isn’t a new problem at all rather it is a very common problem that occurs in older cars and also the ones which have a large mileage.

However, it may occur even though your car is new, but you’re not taking it to the service center on a regular basis.

If you have ever experienced a lifter tick, then you correlate with my statement that it can last from a few minutes to the time the motor is running.

If you’re getting annoyed with the ticking and tapping sounds produced by your engine, then definitely the culprit is the faulty lifter.

Let me tell you if you’re ignoring these sounds for a long time, then you’re inviting a much bigger problem to your doorstep.

In fact, the probability is very high that your engine might get damaged.

So, it should be your priority to get rid of noisy lifters at the earliest.

Can Noisy Lifters Cause Damage?

If you had paid attention to the lifter noise, then you would have felt that they produced tapping noises for some time after turning the engine on, right?

The good news is, that tapping sound in itself isn’t a big problem.

It only tries to tell you that some dirt and mud have accumulated someplace in and around the engine.

And, the specks of dirt have started interfering with the proper functioning of your car’s lifter.

Definitely, this is a temporary problem and you can get rid of it quite easily.

All you need to do is to add some oil additives to the oil.

Keep in mind, that the oil additives should be of high quality so that they can help you to get rid of the rust as well as specks of dirt.

Nonetheless, if the tapping and ticking noises continue for a longer period of time, then the problem is a serious one, and you need to get rid of it at the earliest.

Failing to do so can hinder the normal functioning of other engine parts as well.

And, in the worst case, it can damage your car in the long run leading to a huge financial blow for you.

The damage can be as small as fixing some components of your motor to as large as a total collapse of the engine’s functioning.

Now, the ball is in your court, and it is none other than you who have to take action.

Always remember, someone can walk with you on your journey called life, but no one can walk for you.

So, TAKE ACTION.

FAQs

Well, in this section, I’ll be taking questions on the topic of “oil additives” asked by my clientele as well as readers.

In case, you’ve got any doubt or query feel free to ask us in the comment section.

We’ll be more than happy to assist you.

Will synthetic oil quiet noisy lifters?

Well, it’s not the oil that quiets the noisy lifters but the additives that are added to it.

Let me explain to you with an example.

When you’re using conventional oil for a long time, there is a generation of sludge.

At times, the sludge gets into the hydraulic lifter.

As we all know hydraulic lifters have small spring ball check valves.

 And, when they get stuck, the valve will not hold oil and will not get pumped up to take the gap on the valve train.

This causes valve train noises or valve ticking.

So, what’s the solution?

All you need to do is, add oil additives such as Marvel Mystery (Check the Current Price on Amazon) to engine oil before doing the oil change, and hopefully, you’ll get rid of the noisy lifters.

Marvel Mystery oil additive will slowly attack the rust and deposits in the vicinity of the injector, and thus, will clean it.

Does oil help with the noisy engine?

Well, it DEPENDS on the cause of the noisy engine.

For a crystal clear understanding, you’ll have to understand the functioning of oil.

The primary function of the motor oil is to reduce the friction between the metal parts by lubricating them, and thus, protect them from damage caused by metal-to-metal contact and movement.

Motor oil also protects the lubricating surfaces by cleaning the damaging deposits.

Another important function of motor oil is its ability to neutralize corrosive acids that form in the heat and pressure of the engine environment.

When the engine parts get heated and the temperature soars, motor oil disperses and moves heat away from engine parts to prevent any future damage.

So, all these functions of motor oil make it an important ingredient for the proper and healthy functioning of the car’s engine.

Coming back to the question, whether oil will help or not with the noisy lifter depends to a large extent on whether the cause of the noisy lifter is related to malfunctioning of any of the aforementioned MOTOR OIL functions or NOT.

Let’s make it simple, the most obvious reason would be the noise caused by metal-on-metal contact, and this happens just because the oil isn’t sufficient to lubricate all of the parts properly.

Hope I answered your query successfully 🙂

It’s A Wrap

I’m sure that you would have happily consumed this idiosyncratic piece of information.

Moreover, I’m done with whatever I’ve in my basket for you.

So, here comes an end to the product review of the best oil additives for noisy lifters.

I can assure you that all the oil additives that made it to our list belong to the “top-performing” category, and the only difference they have is some will perform better than others.

Moreover, I’m not saying to go with my words, you can even cross-check with your local mechanic and you’ll get the same answer that all these oil additives are good for the car.

To be honest, there isn’t anything as such “best oil additives for noisy lifters”.

It totally depends on your budget and requirements.

Last but not least, share this piece of information with the ones who are in need of it.

After all, sharing is caring, isn’t it?

[Also Read]

• Noico Sound Deadener Review
• How to Quiet a Noisy Lifter
• Best Automotive Sound Deadening Materials Review