Quietest Pool Pump Review

Buyers Guide, Soundproofing

quietest pool pump review
As an Amazon Associate, I may earn from qualifying purchases at no extra cost to you. All the products recommendation links on izzysmarthomeguide.com will navigate to Amazon

Table of Contents

In this post, I’ll walk you through the various aspects of a whisper-quiet pool pump to help you make an informed buying decision.

Moreover, I’ll also through light on the parameters that you shouldn’t neglect when it comes to buying a quiet pool pump.

Lastly, I would be responding to the queries related to the quietest pool pump to help you mitigate any confusion if any.

So, without any further ado, let’s begin…

Are pool pumps noisy?

Well, this is the first question that I’m asked by most first-time buyers.

To be honest, when I was buying a pool pump for personal use, I was least aware that the pool pump could be so noisy that it would take away NOT only my peace but also my next-door neighbors.

If you’ll dive deep into the situation to find out the main culprit behind this unbearable noise then you’ll find that the screeching of the bearings contributes maximum to the sound pollution.

At the same time, if your pump is running too loud then I would recommend you to first listen to the noise carefully so that you would be able to find out the origin of the sound, that is, whether it is coming from the wet end of the pump or the motor.

It goes without saying that some pumps are quieter as compared to others because the manufacturer puts extra effort into reducing the unwanted noise coming out of them.

Trust me, there can be numerous reasons behind a noisy pump, so it is really important to figure out that one reason that is contributing to the noise.

As per my experience, one of the main reasons behind the noisy pool pumps could be cavitation.

So, what is cavitation?

In layman’s language, the outcome of starving the motor for water. So, if your motor isn’t getting enough water at a rapid pace then definitely it can lead to a lot of problems.

In fact, problem such as cavitation arises mostly when you run the pump for a long time.

As a result of continuous running, the impeller starts to get really hot. Unfortunately, the brass insert present inside the impeller shaft gets separated due to the excessive heat.

Once the brass insert gets separated, the impeller doesn’t have any option but to start rattling inside the pump leading to a loud irritating noise.

In short, paying attention, and regular maintenance can help you to get rid of unwanted noise.

The other reason for a noisy pool pump could be internal blockage.

The main reason so far I know for an internal blockage could be the pulling of debris inside the pump resulting in a grinding sort of noise.

Well, coming to motor noise, it would resemble a large extent the noise that cats make when they scream at you.

When the bearings of your pool pump motor start going bad, the motor will start producing a loud unpleasant noise.

Unfortunately, you can’t lubricate your motor bearing.

The most feasible option that you’ve is changing the bearing.

In the worst case, you may have to change the entire motor which is definitely a costly affair, isn’t it?

Moving further, we would first discuss the top 10 quietest pool pumps that made it to our list, and then I would walk you through a comprehensive buying guide.

Top 10 Best Quiet Pool Pumps Review

Well, your wait is over, in this section, we will be discussing the best quietest pool pumps available on the market.

At the same time, it is equally important for you to understand that the term “Best” is relative indeed, and what may be best for me may not be for you.

So, I would request you to read NOT only the pool pump review but also the buying guide section.

Pentair 342001 SuperFlo VS Variable Speed Pool Pump

Definitely, I would love to begin my review section with one of the quietest and most highly energy-efficient pool pumps available on the market.

Whether you’re on a shoestring budget or you’ve got an abundance budget, you can think of bringing this little beast to your home because of the high-end technology that is used in it.

quiet pool pump review

As the name suggests, this little beast comes with a variable speed technology which I consider its USP.

The good thing about the variable speed technology is that it costs significantly less to operate.

In the latter part, we would definitely discuss both variable-speed pumps as well as single-speed pumps so that you’ll get a fair idea of the benefits of a variable-speed pump.

As of now, consider variable-speed pumps more cost-effective as compared to the single-speed pump.

The machine is user-friendly and in order to provide its users a superlative experience the manufacturer has added features such as a real-time clock with 24-hour memory retention.

The time span of memory retention is good to go, and it definitely gives this pool pump an edge over other machines in a similar price range which lacks this feature.

If we talk about the user interface and installation process, both are good to go, and you’ll not find any difficulty in expediting any of them.

In short, the manufacturer has decided to keep the machine sweet and simple.

Even though you’re a first-time user still you would be able to program and operate the pool pump without any professional help.

Again, I’m trying to highlight that single feature that has made the SuperFlo vs. Variable Speed Pumps very popular.

 As per the claim from the company, the SuperFlo VS Variable Speed Pump can save up to 80 percent of the energy simply by moving water more efficiently at a lower speed. 

You can use it for any pool that requires up to 1.5-HP pump.

Well, if you have any doubt regarding the energy-saving capability of the Pentair SuperFlo VS, then let me tell you, it is energy-star certified so you can trust the company’s claim.

Moreover, it will work effectively on both 110V and 220V so you can choose any of them as per your convenience.

The SuperFlo VS falls under the “whisper quiet pool pump” category and to achieve this level of quietness the machine uses totally enclosed fan-cooled (TEFC) motor.

Why Should I Buy?

I wouldn’t deny the fact that everyone has their own reasons for buying a product as well as rejecting one.

Many of my clients ask me why should I buy this little beast.

I smile and say because of the below reasons.

  • Highly cost-effective
  • User-friendly installation and operation
  • Whisper quiet nature of SuperFlo VS


  • 3 operating speed
  • Real-time, 24-hour clock
  • Runs on 110V-230V electricity

Pentair 340039 SuperFlo High-Performance Single-Speed Pool Pump

To be honest, if you’re looking for a quiet single-speed pool pump then definitely I would recommend Pentair 340039 as it comprises all the features that a quiet pool pump should possess.

When it comes to quietness, I give full marks to the SuperFlo pump, and the good news is that you can own a consumer-grade machine at an affordable price.

top 10 quietest pool pumps review

The manufacturer of this quiet beast has put lots of effort into streamlining the internal flow with the help of superlative design so as to reduce hydraulic noise.

The beast is silent but it does mean that it isn’t STRONG.

The heavy-duty machine comes with a 56-square-flange motor to cater to the end-user’s demands.

Well, if I had to define a SuperFlo pump in three words then I would say it is super energy-efficient, super quiet, and super easy to maintain.

The SuperFlo pump syncs well with both the newbies as well as the professionals.

Furthermore, the installation process is user-friendly, and the design and highly engineered hydraulics are things to watch.

The machine is literally heavy and robust and can deal with daily abuses for years to come.

As compared to its close competitors, it comprises a bigger version of the strainer basket so that you can reduce the effort that needs to be put into the maintenance.

In simple words, you don’t have to empty the strainer very often, and the see-through lid helps you to know the status of the strainer, whether it is half-filled, full-filled, etc.

Do you know that Pentair 340039 is self-priming?

Since it is self-priming it makes a perfect choice for in-ground pools.

Not only you can install it above the water level but also, operate it without any hassle.

Again, I’m highlighting, it is one of the quietest single-speed pool pumps available on the market, and worth the price that you pay for it.

Lastly, the product is NSF-certified so you can show your trust and confidence in the brand.


  • Self-priming makes the startup hassle-free
  • NSF certified
  • Unionized fittings
  • Superior internal flow design for quiet operation
  • See-through lid for fast and easy inspection
Check Pentair 340039 SuperFlo Current Price on Amazon

Pentair 011018 IntelliFlo Variable Speed High-Performance Pool Pump

The third ultra-quiet pool pump on our list is Pentair 011018 which is known for its top-line performance as well as premium features.

The energy-star certified pump claims to save energy up to 90 percent as compared to the traditional pump and is definitely something to brag about.

Furthermore, Pentair 011018 uses idiosyncratic superlative technology as well as permanent magnet motors to achieve a high level of energy saving.

pentair quiet pool pump

At the same time, the machine doesn’t compromise with the quietness level, even with the PMM motor the pump operates at a good pace without any hassle.

I wouldn’t deny the fact that pumps are prone to problems and if you’re operating a pool pump for a long time without proper maintenance then definitely, your pool pump would put you in a problem someday, right?

So, what’s the solution?

Well, considering the aforementioned problem statement and many other similar problems, the Pentair IntelliFlo provides a built-in diagnostic to provide an additional level of protection to the pump.

On top of it, the enclosed fan-cooled motor contributes highly to a longer lifespan as well as quieter operation.

Moreover, if you’re the one who prefers flexibility then definitely, this pump has a lot on offer, It comes with eight different programmable speed settings which will definitely help you with the right pump speed.

To prevent unwanted running of the pump, a built-in timer is provided.

On the downside, the pump runs only on 230V electricity, so if you have a 110V power supply at your pool then you need to find ways that could help you to get a supply of 230V.

Lastly, the company claims that the machine operates at as low as 45 decibels which is almost 4 times lower than the traditional pumps.

So, what are you waiting for, if quietness is your top priority when it comes to buying a pool pump?

In the context of user interface and newbie friendliness, the machine tops the list, as it comes with an LCD display screen, integrated keypad, and exclusive software.


  • 8-speed settings
  • Integrated keypad
  • LCD display screen
  • Up to 90% energy saving as compared to traditional pool pumps.
  • Built-in diagnostic to keep pump protected
Check Pentair 011018 IntelliFlo Current Price on Amazon

Hayward SP2607X10 Super Pump 1 HP Pool Pump

As the name suggests, the Hayward SP2607X10 is a high-performance pool pump which is also known for its “ultra-quiet” feature.

The good about this super pool pump is that it gives you a good number of options to choose from.

For example, depending on the size of your pool, you can choose from 0.5 horsepower to 2.5 horsepower.

quietest pool pump on the market

Not only that, like the previous one, it is also self-priming, so it’s a great choice for in-ground pools.

Needless to say, it is one of the most versatile pool pumps, I’ve come across.

The pump is highly stable and the credit goes to the mounting base that it comes with.

On top of that, the pump can work with both 48-frame and 56-frame motors.

The machine is newbie-friendly and you can easily access the internal part of it in case of any need for repair.

Unlike its close competitors, it comes with a spacious debris basket that saves lots of time as you don’t have to empty the basket every day.

At the same time, the debris basket comes with a clear lid so you don’t have to open it every day to know whether the basket is filled or not.

Just by seeing from outside, you’ll get to know whether the basket is empty or filled.

The reason behind the quiet operation that Hayward performs is improved ventilation.

On the downside, the machine doesn’t possess energy-star certification so you can expect it to be NOT as energy-efficient as the ones that come with the certification.

In short, if your top priority is an “energy-efficient pool pump” then this may not be the best option for you.


  • 110-cubic-inch basket
  • Self-priming up to 10’ of lift
  • Exclusive swing-away hand knobs

Hayward SP2303VSP MaxFlo VS Variable-Speed Pool Pump

To be honest, Hayward SP2303 is a high-end variable speed pool pump that is known for its quietness as well as energy efficiency.

The machine is uniquely designed to help you with up to 80 percent savings on your energy costs as compared to a single-speed pool pump.

Hayward quiet pool pump

It goes without saying that MaxFlo VS will provide you with a smooth and hassle-free operation.

Even though you’re a first-time user, you’ll find the user experience at the superlative level.

If you still have a doubt about the energy-saving then let me tell you, the MaxFlo VS is energy-star certified.

Furthermore, to maintain a high level of quietness, the manufacturer has inculcated a magnet motor into the machine which is totally enclosed and fan-cooled as well.

Needless to say, the machine is highly durable and has a good lifespan so you can use it the way you want for years to come.

Like other premium pumps, it also comes with a digital display which definitely adds to the user experience.

Depending upon your existing wiring, you can select from 115V and 230V.

However, it isn’t switchable so buy the one that syncs well with your circuit.

On top of that, the machine is compatible with automation systems such as OmniLogic, Aqualogic, etc.

All in all, a great quiet pool pump that you can take home, and you’ll never REGRET for your decision.


  • PMM and TEFC motor
  • Available in 115V or 230V
  • Digital display

Blue Wave NE6183 Tidal Wave 2-Speed Replacement Pump for Above Ground Pool

Personally, I’m a big admirer of Blue Wave NE6183 because it possesses all the important features that a quiet pool pump should have without elevating the price.

In short, even though you’re on a shoestring budget you can buy this pool pump.

quietest pool pump for above ground pool

As compared to single-speed pumps, these pumps are more versatile, quiet, and energy-efficient.

Considering the variable dynamics of a pool requirement, the pool pump gives you two options to choose from when it comes to motor speed.

If you’re looking for quieter and less-energy use then you should opt for 1750 RPMs.

On the other hand, if you want to power tools like skimmers and vacuums then it’s better that you opt for 3,450 RPMs.

The pump is user-friendly and anyone can operate it with minimum help.

At the same time, you can play around with the mounting as it can be mounted in many ways, and the credit goes to the dual port that allows for both vertical and horizontal discharge.

In short, it can fit well in a limited space and can adjust as per your requirements.

Since it is self-priming you can expect it to be a great choice for in-ground pools where the pump is mounted higher than the level of water.

When it comes to performance this little beast steals the show as it is capable of flow rates up to 75 gallons per minute at the head of 0′.

What more you expect from a pool pump that is highly affordable?

The NE 6183 is known for its durability and robustness.

Since it is made from corrosion-proof polymer you can expect it to withstand tough climatic conditions.

Depending on the size of your pool, you can either opt for a 1.5 HP or 1 HP motor.

On the downside, the machine is meant to run on only 110V.

All in all, a great product to consider for your pool.

Let me know what you think about this quiet pool pump in the comment section, and if any of you have recently bought it then share with us your experience.


  • 75 GPM flow rate with a head of 0’
  • Comes with a two-speed setting
  • Made of corrosion-proof polymer

Hayward SP1580X15 Power-Flo LX Series

The Hayward SP1580X15 is a high-performance pump that is designed for both above-ground and in-ground pools, and you would be astonished to know that the machine claims to be 100 percent drip-proof.

Definitely, the pump is powerful and user-friendly and comprises features such as thermoplastic housing which helps in protecting the internals from damage by keeping the corrosion away.

This thermoplastic housing has quite a few benefits that you can’t ignore at all.

For example, it is corrosion-proof and dumps unwanted noises to help you with an idiosyncratic superlative experience.

top-rated quietest pool pumps

The machine is robust, durable, and can tackle any weather change.

As we all know the motor is the heart of the pump, so it needs additional protection, right?

To suffice the aforementioned requirement, Hayward SP1580X15 comes with a heat-resistant double-sized seal to protect the motor and keep it running for years to come.

The manufacturer has given special weightage to convenience by inculcating an oversized strainer basket with 118 cubic inches of space.

Furthermore, a transparent lid cover helps you to check the status of the debris in the basket.

The pump runs on standard 120V and can be installed easily without any professional help.

To make things easy for you, the pump comes with a six-foot power cord which you can plug into any standard outlet.

On the downside, if you’re currently based out of California then I’ve got bad news for you, guess?

Well, you wouldn’t be able to use this 1.5 HP single-speed pump as any single-speed pump with horsepower more than 1 HP or greater is prohibited in California as well as Florida.

Anyway, no need to get disheartened, there are other good pool pumps to choose from.


  • Comes with a thermoplastic housing which is corrosion-proof
  • The strainer basket is 118 cubic inches with a clear lid
  • The heat-resistant seal protects the motor for a longer lifespan

Harris H1572730 ProForce 1.5 HP Above Ground Pool Pump

Again, I’ve another ultra-quiet pool pump that you can opt for if you’re on a shoestring budget.

Trust me, the Harris H152730 Above Ground Pool Pump has everything in it that you would want to have in your ground pool pump.

Well, it is durable, easy to install, corrosion-resistant, and whatnot.

I find it a perfect choice when it comes to buying a quiet ground pool pump.

quietest pool pumps review

The manufacturer has emphasized a lot on durability as the machine comprises a thermoplastic body that not only protects it against corrosion but also, allows it to perform superlatively in any weather condition.

Not only that, but the pump also has a good lifespan and is reluctant against physical damage as well.

The pump has a powerful motor of 1.5 HP which doesn’t work quietly without disturbing you and your next-door neighbors.

To be honest, with the help of advanced engineering, the motor is able to manage high power and efficiency without compromising on quietness.

Unfortunately, you can’t use Harris ProForce as it’s a single-speed pump with horsepower of more than 1 HP.

On the downside, you can’t program this pump so you may not find it as quiet and energy-efficient as some of the high-end programmable pool pumps.

Another thing that I don’t appreciate about this pump is the length of the power cord which is definitely shorter than some of the competitor models.

You need a 115V outlet to plug in this pump.

Since the power cord is just 3-feet long you may have to relocate the pump or outlet closer to each other which is something many of you may not be comfortable with, right?

However, if we consider the price at which it comes then definitely, it’s a value-for-money product.


  • 115V power cord
  • High-efficiency design
  • Reinforced thermoplastic body

XtremepowerUS 2HP Inground Pool Pump 220V Dual Speed

XtremepowerUS Inground Pool Pump is definitely a good substitute for some of the well-known brands such as standard Hayward and Pentair pool pumps.

The good thing about this in-ground pool pump is that it can be used for a pool of almost any size because it possesses a very powerful motor of 2 HP.

The motor needs 220V to operate quietly, and if you don’t have a 220V electric circuit then things could turn out to be bizarre.

(Check Quietest Pool Pumps Price On Amazon)

Needless to say, if our current pool pump is 220V then definitely, this could easily replace that one.

Do you know that with such a superlative power the motor is capable of moving approximately 88 gallons per minute?

With a maximum suction of 66 feet, you can easily consider it as one of the best in-ground pool pumps.

On top of it, inches union connections are used at both the suction as well as discharge ports so that the water flows freely and quietly without getting stuck anywhere.

The pump is highly versatile and if you don’t want to run it on the maximum power then you do have an option to run it at a low mode which is far more energy-efficient and quieter.

However, I highly recommend using high mode when you’re dealing with vacuums, skimmers, etc.

Like the aforementioned models, it also comes with a large and spacious debris basket and a clear lid which saves a lot of your time as you’ll not have to clean the basket every day.

The XtremepowerUS self-priming pool pump is durable and long-lasting and the credit goes to the corrosion-proof polymeric material that it is built of.

Furthermore, the pump can be easily installed and is compatible with both solar heating and in-floor cleaning systems.

All in all, a great quiet pool pump that you can think of taking home.


  • 88 GPM flow rate
  • 66’ max suction distance
  • 2 HP motor

Wayne 57729-WYNP WAPC250 Pool Cover Pump

Well, we’ve come to the end of our pool pump review list, and Wayne 57729 is the last quiet pool pump that we will be reviewing in this post.

But, before we start our discussion on this pool pump, let’s discuss a scenario that most pool owners face at some point in time.

Especially during the rainy season, your pool cover starts to accumulate water, and to remove it, you need to take the cover off, right?

There are two main ways to remove the cover, either you can call up a professional for it or buy a pool cover pump whichever suits you.

However, I would like the highlight that the former wouldn’t ONLY be expensive but also time-consuming.

best quiet shop vac

So, if you’re considering the latter method as your solution then I would highly recommend you try the Wayne 57729 pool cover pump as it automatically operates when it detects water, so you don’t have to do anything manually.

The machine is newbie-friendly and doesn’t need any technical expertise to operate and manage it.

Furthermore, let’s dive a little more into the automatic operation that the machine expedites.

In short, let’s see when the machine will start operating and when will it shut down.

Do we need to perform any task on our end or everything would be taken care of by the pump automatically?

So, here is the answer to the aforementioned query, the pump will automatically turn on when the water on your cover pool reaches 2⅛”, and will start removing the water.

Similarly, when the water gets below ¾”, the pump will automatically shut down, and thus, the electricity would be saved from getting wasted.

In layman’s language, just plug in the pump and walk away rest would be taken care of by the machine, and you don’t have to perform any manual operation.

On top of that, you don’t have to worry about the pump or the pool cover getting damaged.

I would love to hear your feedback about this automatic little beast.

You would be astonished to know that, unlike other pool pumps that need to be emptied and prepared for the cold weather, the Wayne pool cover pump doesn’t have to waste any time in such events.

And, I know you would be inquisitive about why this pump is an exception, right?

Well, as an informed buyer, you should be inquisitive about each and everything that creates an element of doubt in your brain.

To make a long story short, the pump comprises built-in freeze protection which protects it from getting damaged in cold conditions.

But, it doesn’t mean that you should leave the pump outside when the temperature deteriorates below freezing.

Another great thing about this pump is that it is oil-free which means you don’t have to spend time and money on regular maintenance.

The pump has a wider base which prevents it from toppling, so stability wouldn’t be any cause of concern.

The pump has an almost negligible chance of getting clogged as it comes with a strainer base that filters the debris.


  • iSwitch technology
  • Comes with an automatic freeze protection
  • Low maintenance cost due to oil-free pump

Choosing a Quiet Pool Pump: What Parameters You Need to Look For?

As promised to you, I’m going to walk you through some of the important parameters that you can’t afford to neglect when it comes to buying the best quiet pool pump for the money.

Though there are numerous parameters that you need to consider when it comes to buying any product not only a quiet pool pump.

However, I would request you to NOT neglect the four parameters that I will be discussing in this section.

How important is the role of the motor horsepower when it comes to buying a quiet pool pump?

Well, power should be on top of your priority in case you want to buy a good pump.

However, it doesn’t mean by any means that you’ve to buy the pump that has the most powerful motor.

In fact, you need to evaluate first what horsepower would suffice your requirement.

For example, a larger pool would require a more powerful motor and vice-versa.

Furthermore, if you’re a first-time buyer then let me tell you that the power of a pump is measured by gallons per minute (GPM) of water.

The basic criteria for a pump to be effective is that it should be able to circulate all the water in the pool in less than 12 hours.

Moreover, GPM is directly proportional to the horsepower so the higher the horsepower more would be the GPM.

If you’re not sure exactly what GPM your pool needs then you can calculate it using the below-mentioned method.

  • First and foremost, find the volume of your pool in gallons
  • Secondly, multiply the volume by 2
  • Now, divide the number that you got in step 2 by 24 to get gallons per hour
  • Finally, divide the number that you got in step 3 by 60 to get gallons per minute

I hope using the aforementioned method you will be able to find out the GPM of your pool.

Do I really need a quiet pool pump?

Well, if you don’t have any problem with the noise created by a pool pump then it’s totally fine, you can skip this section.

However, if you’re looking for a quiet pool pump then definitely you need to look for models that use innovative and high technology, and in return produce less noise.

The general thumb rule is the stronger the pumps are the more noise they would produce.

Nonetheless, thanks to the technology that has helped the manufacturer to come up with powerful pumps without compromising on quietness.

The noise produced by a pump is directly proportional to the number of vibrations coming out of the motor.

Furthermore, a quieter pump comes with thicker insulation.

At the same time, quietness also depends upon the type of model.

For example, you can expect a variable-speed pool pump to be quieter than other models.

By following some simple hacks, you will be able to reduce the pool pump noise significantly.

  • Avoid 90-degree angles when setting up the pump
  • Try to minimize the distance between the pool and the pump
  • Prefer a larger pool filter over its smaller counterpart
  • Regularly cleaning the pool grates can also decimate the unwanted noise

How important is it for a pool pump to be energy-efficient?

In one line, your pool pump MUST be energy efficient as it needs to run for long hours.

In case, the pump fails on the energy-efficient parameters then it will literally cost you quite a few dollars in the long run, and you’ll definitely see a spike in your electricity bills.

Again, energy efficiency depends on the model that you’re planning to buy.

For example, variable-speed and two-speed pool pumps tend to perform better as compared to other models.

Well, other than being energy-efficient, the variable speed pumps come with powerful motors that are designed to run continuously for hours which may not be possible in a regular pump.

Scrubbing the pool walls and using chemical additives before each pumping session would drastically reduce the pumping time.

Does price matter when it comes to buying a quiet pool pump?

Well, it DEPENDS.

To be honest, individuals like me, who are sensitive about the price of a product and don’t settle down for anything less than the best product for the money would definitely do a lot of online as well as offline research.

Let me tell you when it comes to a quiet pool pump, the parameters that can influence the price of a model are mainly power, efficiency, and type of pump.

Again, getting a budget pool pump isn’t difficult but at the same time, finding one that suffices all your requirements would definitely be a tedious task to find, isn’t it?

It is understood that a quiet pump has more power and high-end features are bound to be costly.

Nonetheless, always go for a pool pump model that is energy-efficient and has zero maintenance cost because, in the long run, it will save you a ton of MULLAH.

Pump Motor Voltage

Before buying a pump, it is important for you to check what voltage electricity your current pump is running.

In case you’re not aware, then let me tell you, a pool pump comes from two voltage outlets, that is, 120V and 240V.

Well, the problem arises when you’ve 240V electricity at your pool and you bought a machine that works on 120V.

I’m not saying that there is no solution to such problems.

However, you’ll have to do some major modifications to run the pump successfully, and needless to say, such a process is costly as well as tedious.

Look for the brands that provide warranty as well as great customer service

Since you would be using your quiet pool pump on a regular basis and for long hours the probability is high that at times things can go wrong, after all, it’s a machine.

So, in that case, good customer service and the proper warranty would be of great help.

Furthermore, I always advise my clients to look for pool pump brands that come with good post-sales customer service.

Does the pool pump type matter?

As a first-time, the first question that comes to one’s mind is What type of pool pump should I buy, right?

Secondly, how would the type of pool pump affect features like energy efficiency and quietness?

Well, let me try to quench your thirst for pool pump type, always go for a variable speed pump that can be set to run at the exact right RPMs for your pool.

In-Ground or Above-Ground

Should I go for an In-ground or Above-ground pool pump?

Again, it depends upon your requirements.

What I’ll do it, I’ll walk you through these types so that it will help you in making a buying decision, Sounds great?

If you’re going for an in-ground pool pump then make sure that it is self-priming.

An in-ground pool pump is installed above the level of the water so if it isn’t self-priming then lifting the water vertically would be next to impossible.

On the contrary, above-ground pool pumps are installed below the water level so they can work well even though they aren’t self-priming.


As I said earlier, you also don’t need a product that comes with luxury and high-end features.

However, if you don’t have a budget constraint then things are different and you can buy any pool pump model.

It goes without saying that some high-end pumps are more appealing just because they come with some idiosyncratic features.

 Nonetheless, some essential features worth considering are digital displays, oversized strainer baskets, and multiple operating speeds. 

Does the size of your pool matter?

The discussion would be incomplete if I hadn’t discussed the size of the pool, and how it influences your buying decision.

It is highly advisable that you’ve your calculation in place regarding the gallons of water your pool holds.

It will help you to understand your requirements such as pool pump power and the flow rate needed to circulate the volume of water.

In case, you’re finding it difficult to narrow down options or find the exact power and flow rate requirement then I would advise you to check the manufacturer’s suggestion.

In short, pool size does matter when it comes to buying a quiet pool pump as it can influence certain parameters such as power, flow rate, etc.

Quiet Pool Pumps Main Components

Most of you would be astonished to know that in spite of performing complex functions the structure of the pool pump is quite simple.

In fact, they are comprised of mainly three components.

Housinga small container comprising of the lid and a strainer basket, and is responsible for sucking the water to make its way to the filter.

Impeller– a spinning blade responsible for creating the suction that forces the water to circulate properly through the pump and up to the filter.

Motor– a machine that is attached to the back of the impeller to help it spin, and is the one component that is responsible for making unwanted noise.

Types of Pool Pumps

Well, moving forward, we would discuss, the type of pool pumps, so that it would be easy for you to narrow down the options.

Moreover, I would request the newbies to refrain from skipping this section.

On the basis of speed setting, pool pumps are mainly categorized into three different groups, that is, single-speed, two-speed, and variable-speed.

Sounds GREAT…

So, without wasting any time, let’s discuss each one of them in detail.

Single-Speed Pool Pump

A single-speed pool pump is a household name, indeed.

Needless to say, it is the most commonly used pool pump and is known to pump water at a constant speed.

Without any doubt, I can affirm that the single-speed pool pumps are the cheapest among all types, and it has their own advantages and disadvantages.

The good thing about these cheapest pool pumps is that they come with a high operating speed, and also, provide high functionality.

Unfortunately, you may end up paying more electricity bills as you don’t have the option to reduce power when you don’t need high power and energy.

If you consider using it for quite a few years then definitely, you would end up paying high energy bills as compared to other pool pump models.

In the context of quietness, they aren’t the best ones to vouch for.

Two Speed Pool Pumps

To be honest, there isn’t much difference between the dual-speed pool pump and the aforementioned one.

The ONLY difference I could find is the inclusion of a “low-speed” setting option.

The low-speed option could be exploited for the primary circulation and filtration functions.

For the heating purpose as well as vacuuming the pool, switch to the high setting from the low-speed option.

There is no doubt that function-wise a dual version of the pool pump is better than the single-speed pool pump.

However, in the context of energy bills, I don’t think the dual version can make much difference.

In fact, the high-speed setting is almost similar to the single-speed setting option so you’ll not save a huge amount on energy bills.

Variable Speed Pool Pumps

It goes without saying that the variable speed pool pumps are the best among all three types, and there are many reasons for this.

First and foremost, a variable-speed pool pump comes with loads and loads of feasibility.

For example, it allows you to set the GPM as well as follow rate as per your requirement which isn’t the case with the other models.

Not only that, it also allows you to control the rate of flow of water which is very important for getting a satisfactory result from the pump.

Some other benefits include but are not limited to lower utility bills, flexibility, newbie friendliness, etc.

But, remember, all these additional benefits come at a price.

However, if you’re considering a quiet pool pump as a long-term investment then definitely you should go for a variable-speed model.

In-Ground vs. Above-Ground Pool Pumps

Well, if you’re a newbie then chances are high that you wouldn’t be aware of the terms in-ground and above-ground pool pumps.

In fact, in-ground and above-ground refers to the kind of pool that you’ve.

And, would determine what kind of pump you need.

They differ in quite a few ways but the main difference is that the in-ground ones are self-priming whereas the above-ground pool pumps aren’t.

Furthermore, the in-ground pool pumps are located above the water levels so they are capable of lifting the water vertically which isn’t the case with the above-ground pool pumps.

Since above-ground pool pumps are located below water level gravity and atmospheric pressure are the two things that they require to feed the pump.

If we talk in the context of physical appearance the definitely in-ground pool pumps are larger and bulkier as they are meant to handle a larger volume of water at higher flow rates.

Best Pool Pump Brands

Trust me, it is important especially for the newbies to have some ideas about the best pool pump brands.

Needless to say, the professional would be well aware of the best pool pump brands, and so can skip this section.

I’m going to discuss the top three pool pump brands to help you make an informed buying decision.


Do I really need to introduce the Pentair brand?

Trust me, it is a well-known and established brand in the pool equipment domain.

If you’re still confused about the size of this brand then let me tell you, it generated a revenue of a whopping $3 billion in the year 2019 and also, has a presence in 25 countries.

Pentair is well-known for providing sustainable water solutions to not only industries but also individuals worldwide.

On the CSR front, they have come up with a safe water program that has helped 3 million people in the developing world gain access to clean and safe water.

In short, they make a good profit but at the same time, they also contribute a good amount for the welfare of people across the globe.


Again, Hayward is also a well-established brand in the pool industry and has been doing a commendable job for over 80 years.

They are mainly known for developing cutting-edge pool equipment and trust me, they really work hard to be the leader in technology innovation.

They are equally good at offering commercial and residential product lines.

Moreover, they come up with innovative and affordable high-quality equipment that is bound to make your life simpler and easier.

Blue Wave

The last pool pump brand on our list is Blue Wave.

Though they have started their journey a decade back still they are able to compete with the pioneers in their field which is definitely a great achievement for them, isn’t it?

They are known for providing high-quality pool kits, equipment, and accessories.

Moreover, they have the best customer service in the industry and specialized staff helps you to find a logical answer to your query.

Pool Pump Size Chart

Pool Size (US Gallons)Turnover (Hours)Minimum Flow Rate
35,0008 Hours73 GPM
35,00010 Hours58 GPM
24,0008 Hours50 GPM
24,00010 Hours40 GPM
18,0008 Hours38 GPM
18,00010 Hours30 GPM

Pool Pump Noise Reduction

Well, in this section, we will be discussing some of the hacks that you can apply to your existing pool pump to make it quiet.

Though these methods wouldn’t be as effective as buying a new quiet pool pump still they would be worth trying.

So, let’s discuss each one of these methods in detail.

Pool Pump Motor Vibration Reduction

It is understood that a pool pump makes noise.

However, if your pool pump is making a very loud noise then definitely something is wrong somewhere.

In most cases, it’s the motor vibration that makes things worse.

In layman’s language, if your pool pump is too noisy then the first thing that you need to check is the vibration of the motor.

At times, keeping a check on the vibration has solved the noisy pool pump problem for my clients.

Furthermore, check for the presence of any loose bolts, screws, etc as they can aggravate the vibration.

The best way to tackle such situations is to completely remove the bolts and add some rubber pads as the vibration insulator, and then screw back the volts in place.

Keep the Skimmer Basket Clean

It is very important to keep the skimmer basket clean.

Failing to do so can lead to clogging due to the accumulation of lots of trash.

As a result, the pump wouldn’t receive enough water leading to unwanted noise.

You can even go for a quiet pool pump which comes with a huge basket so that you don’t have to clean it too often.

Raise Pool Water Level

When the pump motor doesn’t get its share of water it starts heating which can be a disaster at times.

So, the best thing that you can do is keep a check on the level of water in the pool.

In case, the motor isn’t getting sufficient water, it is highly recommended that you raise the level of water in the pool to prevent any mishap.

Make Sure that the Impeller is Clean

To prevent unwanted noise, it is important that you make sure that the impeller is free from leaves or anything similar that may get stuck and create unwanted noise.

The problem is that if something gets stuck in the motor’s impeller then it may hinder the healthy flow of water across the pump leading to a decrease in the lifespan of the pump, and of course, may create unwanted noise.

Check out the below video as it will help you clean the impeller.

If NEEDED, Replace the Bearings of Your Pool Pump

I’m damn sure that you’ll not have to replace the bearings of your pool pump, until and unless your machine is very old or has been used aggressively over a period of time.

However, I don’t deny the exception.

Furthermore, I would highly recommend that before trying this method, you should definitely try all the aforementioned methods.

In short, try this method only if you can’t get any results from the aforementioned methods.

So, once you’ve taken a call that you want to replace the bearings since you’ve already tried all the methods and still your pool pump is noisy, then hire a professional for it.

Refrain from trying on your own until and unless you’re an expert in such a job.

The reason why I’m warning you is that placing a bearing wrongly or a wrong bearing can permanently damage the motor.

However, if you’ve taken a pledge that you’re going to do it on your own then I would suggest you should watch the below video.

Wrapping Up the Quietest Pool Pump Review

Well, I hope you’ve thoroughly enough this gigantic piece of information about a quiet pool pump.

To be honest, I and my team have tried to the best of our capabilities to inculcate all the required information that could help you in making an informed buying decision.

So, what is your favorite quiet pool pump?

And, how much are you willing to spend on a quiet pool pump?

Well, I don’t want to keep you waiting, in case, you’re looking for my recommendation then I would highly recommend you to buy the Pentair 011018 IntelliFlo Variable Speed High-Performance Pool Pump (check current price on Amazon) as I’ve been using it for quite a little time and have literally found it worth every penny spent.

Finally, please share this piece of information with the ones who are in need of it.

After all, sharing is caring, isn’t it?

[Also Read]