So, here I come with the best way to level ground for the pool.
Well, in this post, I would be walking you through the various aspects of leveling ground for a pool to help you make an informed decision.
Moreover, I would be throwing light on and out how to level ground for a pool with sand.
So, are you ready for the ride?
Cheapest Way To Level Ground For Pool | Beginner’s Guide
Frankly speaking, if you’re installing an above-ground pool for summer then the ground needs to be leveled.
But, before we dive deep into the topic, let’s understand why should you level the ground for your pool.
Moving further, we would also be discussing the tips and tricks that you need to use for finding the right place for your pool.
Moreover, once you’re done with leveling the ground for your pool, it is equally important that you know how to check if the ground is level.
Why should I level the ground for the pool?
The pool needs to be flat for the homogeneous distribution of the pressure.
Moreover, if your pool isn’t flat then it will add pressure to one side of your pool.
As a result, the whole structure might collapse or malfunction.
Similarly, if one side is deeper than the other, it might give an invitation to unprecedented events.
Lack of leveling of the pool surface might lead to confusion among the swimmer and can lead to mishaps.
For example, if the swimmers are able to reach the base of the pool at one end then they might be overconfident of reaching the other end of the pool without knowing the fact that it is very deep and can lead to a severe incident.
Similarly, if the swallow side of your pool happens to be there where the skimmer is then it might cause some serious problems for your pool equipment, and thus, might take a toll on the cleanliness and longevity of pool equipment.
Uneven labeling will also give a bad look and feel to the swimmers.
Finding the Right Place For Your Pool
Definitely, you need to find the right place for your pool in order to achieve an optimum result.
The right place would definitely help you in keeping the pool clear, clean, and safe.
Moreover, even if the area isn’t leveled, you’ll need to put in very little effort to achieve an optimum result.
It’s always advisable to avoid the area which has a higher degree of inclination as you’ll have to put loads and loads of effort into labeling the surface.
Also, when you’re in search of an idea for your pool make sure that the area is out of the reach of trees, that is, no trees are present in the vicinity to avoid the maintenance overload that might be caused due to the falling of leaves in the pool.
Furthermore, you should also try to keep a distance from the above and below-ground power lines to prevent any last-hour misadventure.
So, while selecting the area for your above-ground pool, you need to keep the aforementioned points in your mind.
Also, pay imperative attention to the codes specific to your area, this will help you in figuring out the approximate distance that you must keep your pool from the road and property line.
All these points might seem to you as simple but not following anyone of them can be a pain in your butt.
I always suggest my clientele should contact the local authority in their area if they are skeptical about some laws.
It’s always a good decision to understand all the rules and regulations before expediting the installation of an in-ground or above-ground pool.
Does it make sense?
Ways to Check if the Ground is Level
First and foremost, you need to figure out if the land is inclined.
And, if yes, then at what angle is it inclined?
You can even use some instruments to check and calculate the inclination of the land.
If the reading shows a higher degree of slope or inclination, then try to avoid using the land if possible.
Or, else, find out the ways and efforts that need to be put into leveling the land.
As per my knowledge and experience, the best way to level the ground of your pool is to take the help of the laser level.
Needless to say, it might add some additional cost to the entire installation process but is worth the investment as it will save you a lot of time.
Furthermore, as you might require to check leveling at different times so the laser tool might be a great way to save a good amount of time.
Another benefit of using a laser tool might be the precision reading that it can provide you with.
Clear the Area
I’m assuming that now you would be able to find out the perfect place for your above-ground pool.
Once you’ve finalized the area, the next thing that you need to do is to clear that specific area.
The area should be cleaned with the help of technologically advanced tools if possible in order to save you a good amount of time.
Moreover, you can also use sticks and other similar traditional tools to clear the area.
Small and big rocks should be removed from the area and unwanted vegetation needs to be cleaned in the best possible manner to achieve an optimum result.
On the other hand, if the area that you’ve decided for installing your above-ground pool comes with smaller and harder to remove sharp objects including glass fragments then it might be a better idea to move to some other better and clean place.
It is my humble request that before selecting any area make sure that the effort needed to free the area from the unwanted vegetation, rocks, etc is not EXTREME.
How to level ground for your pool?
Let’s have a quick look at some of the cost-effective and time-efficient ways to level ground for your pool effortlessly.
In spite of you being a newbie or a seasoned professional, the below-mentioned methods would do the trick for you.
Does it make sense?
Dig
Trust me, one of the best ways to expedite the leveling process is digging without any doubt.
Any bumps should be dug out and then leveling should again check with the help of the laser method or any other method that works for you.
Digging might take some extra effort and time but is worth the time, and is a very viable and stable way of achieving the leveling.
Sand
Moving further, you need to create a stable base with the help of sand.
Depending upon the size of your pool, the amount of sand that you’ll need would vary.
For large-size pools, you would be needing a good amount of sand.
The layer of sand should also be thick enough to tackle sharp objects that might be present on the ground.
Sand would provide a protective layer between the base and the ground.
Another benefit of using sand is that it helps to keep your pool well in place when you’re expediting the installation process.
Once you’ve spread out the sand, it needs to be flattened with the help of a rake.
Then, water the area thoroughly before leaving it to become dry.
Before you start the installation process of your pool ensure that the sand has become dry.
It’s always advisable to choose a sunny day for the pool installation.
Flatten the Sand
After the sand has become dry, you need to compress and flatten it.
You can compact the sand with the help of some idiosyncratic tools including a compactor.
Even a garden roller would help you in flattening the sand.
In case, you don’t own any of the flattening tools then you can rent some from the local garden store.
Check Again
So, you need to check the progress of leveling.
In case, you find some discrepancies in the leveling of the ground then do the needful accordingly.
It is highly suggested that you check the leveling at different stages of the above-ground pool installation in order to achieve an optimum result.
Base Layer Installation
You can add foam layers that are great for keeping the heat in the water.
Make sure that you’ve added a proper layer of foam under the base.
Even laying down a tarp can be a good way of protecting your pool.
The benefit of placing some tarp would be to help you with an additional layer to prevent sharp objects from becoming a problem.
And, you can consider it as the last step prior to the installation of a pool.
Final Step
As the name suggests, the final or the last step would be none other than the installation of your above-ground pool.
It goes without saying that brands can differ in shape, size, and model but the essence of the pre-installation process should remain the same.
Always emphasize the installation of a secure and level base.
It’s A Wrap
First and foremost, I would like to thank you for being with us till the end.
Moreover, I along with my core team have put loads and loads of effort into coming up with this idiosyncratic comprehensive guide on how to level ground for pool.
So, in case, you’ve loved our effort and want to recognize or appreciate us then rate us on a scale of 1 to 5 with the latter being the best.
Cutting long-story-short, let’s get back straight to the conclusion.
Well, although almost all the steps that we’ve discussed so far are easy to expedite still I would like to put in front of you that these steps will take time so you need to be patient while installing an above-ground pool.
Irrespective of the dimensions of the pool that you’re installing it is really important that things fall well in place because once the installation process has been expedited it would be really difficult for you to do any amendments.
As mentioned earlier also, emphasize installing a quality base layer so that you can enjoy hassle-free swimming.
At any point in time, if you feel you’re not clear with the installation process then don’t hesitate in taking the help of a professional.
Last but not least, share this piece of information with the ones who are in need of it.
After all, sharing is caring, isn’t it?
[Also Read]