If you’re planning to get black mold off your shower door track for the first time, then you need to follow all the steps without skipping what we would discuss in this post.
Keep reading as I’ll walk you through various aspects of cleaning a shower door track in order to help you make an informed decision.
The unique thing about this post is that I would be talking about how to use simple ingredients for getting rid of black mold from your shower door track.
Does it make sense?
So, without any further ado, let’s begin…
The black molds are sometimes pink or even green, and generally grow in and around the edges of a shower door where the glass meets the frame.
Not only are these fungi ugly but can also cause illness among those who are allergic to mold and mildew.
As such, there isn’t much difference between mold and mildew.
“Mold” is a fungus, and “Mildew” is the outcome of the fungus buildup.
Cleaning black mold off your shower door track is accessible irrespective of whether you’re expediting the cleaning process for the first time or are a seasoned professional.
You can use chlorine or hydrogen peroxide solution for getting rid of these nasty black elements.
These solutions are equally capable of cleaning these black molds.
All you need to do is to spray and wipe it off, no need to scrub.
In case, you didn’t get the expected result in the first cleaning, repeat the process a couple of times, and you’ll get the desired result.
However, in case of mildew creeps behind the caulk, you don’t have many options but to replace it.
Unfortunately, once the black mold gets back there or into the grout anywhere else in the bathroom, then getting rid of it will be a tedious and time-consuming process.
So, you need to be careful as prevention is better than cure.
In order to prevent black mold from returning back you can your shower door open between uses so that air can circulate.
It’s advisable to consider using an anti-mildew spray after each shower.
However, if you’re living in a hard water region then you need to deal with the problem from a different angle.
As we all know, hard water contains excessive minerals that may stick around even after the water has been washed away.
The problem with such minerals is that they can leave a caked-on mess in pipes as well as water faucets.
Needless to say, hard water spots present on shower doors are impossible to hide and are definitely difficult to hide as well.
A vinegar solution can do the trick for you.
Prepare a vinegar solution by mixing water and vinegar in a 1:1 ratio.
Spray the vinegar solution on the impacted area in sufficient amounts and allow it to settle down.
Finally, rinse it off.
On the other hand, if water spots are present on the metal rim, then the best way to deal with it is by using citrus oil such as lemon or orange.
Once you’re done with the cleaning and scrubbing the next thing that needs to be done is to consider applying car wax to your shower doors.
What actually it will do is it will seal the surface so it’s harder for the minerals to deposit there.
At the same time, you need to ensure that wax isn’t spilled on your bathroom floor as it can lead to slippage.[Related]
- Best Shower Curtain Rods
- Shower Curtain Hooks Review
- Best Extra Long Shower Curtains
- Semi Frameless Shower Doors Review
- How to Remove Plastic Strips From the Bottom of a Shower Door?
Cleaning Aluminum Shower Door Tracks With Vinegar
White vinegar is known for its mold-killer characteristic, thanks to its acidic nature.
So, exploiting its mold and mildew fighting feature could be a great idea for sure.
But, before expediting the cleaning process, you would be needing certain materials that are mentioned below.
- White vinegar
- Sponge or magic eraser
- Soft toothbrush
- Spray bottle
Using Vinegar for Cleaning Your Shower Door Tracks
- First and foremost, you need to fill a spray bottle with vinegar
- In case, your bathroom floor is made up of stone then you need to apply the vinegar with cotton balls in order to avoid getting it to your bathroom floor
- Make sure to spray down the tracks with vinegar
- Allow the mixture to sit for at least 30 minutes
- For scrubbing soap scrum and grime, you need to ensure that you’re using a soft toothbrush
- Work the magic eraser over stubborn areas
- Wet a sponge and wide down the track
- If needed, repeat the aforementioned steps
How to Clean Shower Door Tracks With Baking Soda
If you’ve got nasty soap scum and mildew on your shower door track then baking soda can do the trick for you.
Trust me, this light abrasive cleaner can scrub away any shower door gunk.
Keep handy the below-mentioned materials in order to prevent any last-minute debacle.
- Baking Soda
- Microfiber Cloth
How to Clean Shower Door Tracks With Baking Soda
- First and foremost, you need to mix baking soda and water in a bowl to create a paste
- Moving further, you need to dip your toothbrush in the cloth and scrub the tracks
- For stubborn areas, use the microfiber cloth to apply the paste to all the areas of the tracks
- Allow it to sit for 30 minutes to an hour in order to optimize your result
- Again, you need to scrub again with a toothbrush
- Rinse and wipe down
How to Clean Shower Door Tracks With Lemon
A concentrated lemon solution can be used to clean nasty molds and mildew on your shower door track in an epigrammatic span of time.
Be prepared with the below-mentioned materials to avoid any last-minute misadventure.
- Lemon or lemon juice
Method for Using Lemon to Clean Shower Tracks
- Quarter a lemon
- Take the wedge and dip it into salt
- Then, use it to scrub the tracks in the best possible way that you could
- At least, allow the lemon to sit for 30 minutes for optimizing your result
- Extra grimy areas need to be scrubbed using a soft toothbrush
- Finally, rinse off the residual by using a wet cloth
- For the best result, you can prepare a paste of lemon juice and salt and then apply it with the help of a soft toothbrush on the impacted area
Using Peroxide to Clean Shower Door Tracks
If you’re not interested in using a harsh chemical such as bleach for dealing with black molds on your shower door track then an alternative could be the use of peroxide.
You need to be well-prepared with the below-mentioned list of things even before you start expediting the cleaning process.
- Hydrogen peroxide
- Dish Soap
- Spray Bottle
- Soft Toothbrush
How to Use Peroxide to Clean Shower Door Tracks
- Prepare a mixture of hydrogen peroxide and a few squirts of dawn by mixing them in a spray bottle
- Spray the mixture on the impacted area
- Allow the solution to sit for at least 15 minutes
- Then, scrub the gunk using a soft toothbrush, refrain from pushing the brush hard
- Finally, the residual needs to be rinsed off using a wet cloth
- Don’t leave dish soap as it can be slippery
Cleaning Shower Door Tracks With Steamer
Trust me, this is one of the best ways for cleaning your shower door tracks if you’ve got a steamer for your floors or clothes.
Please be prepared with the below-mentioned list.
- Steamer with wand
- Soft Toothbrush
- Plastic Putty Knife
Cleaning Shower Door Tracks With Steamer Steps
- Before grabbing your steamer and going to town on your tracks, make sure to use it properly and read all instructions
- Run the steamer over the tracks to break up the water deposits and gunk
- Use a soft toothbrush and putty knife to loosen stubborn areas
- Finally, if needed, repeat the steps until the tracks are completely clean
Using Commerical Cleaner to Clean Shower Door Tracks
If you’ve got a scarcity of time, then make sure you’re using a premium quality commercial cleaner to clean your shower door track.
Be prepared with the below-mentioned list of items.
- Rags or old towels
- Empty, clean spray bottle
- Magic eraser
- Old toothbrush
Steps to a Clean Shower Door With Commerical Cleaners
- A commercial cleaner may contain harsh chemicals so you must protect your hand by putting on gloves
- Tracks need to be sprinkled with cleaner
- Allow the cleaner to sit for the recommended amount of time as mentioned on the bottle
- The shower track needs to be scrubbed using a soft toothbrush
- Allow the mildew and soap scum to be loosened. Keep on scrubbing till the time the track is thoroughly clean
- Finally, rinse with clean water and dry with a dry rag
How to Clean Under Shower Door Track?
The good news is, all the aforementioned steps work equally well when it comes to cleaning an under-shower door track.
You don’t have to waste time experimenting with new things or steps.
All you need to do is to choose from the aforementioned methods and implement them without skipping any step.
Trust me, our clients have applied these methods when it comes to cleaning an under-shower door track, and the feedback that we’ve received so far is positive and promising.
- Using white vinegar for cleaning an under-shower door track
- Cleaning an under-shower door using baking soda or lemon
- Using peroxide or a commercial cleaner for cleaning an under-shower door track
How to Clean Rust from Shower Door Tracks?
Cleaning rust from your shower door track is easy and can be done in an epigrammatic span of time without any hassle.
You can choose from two strong cleaning agents, that is, rubbing alcohol, and hydrogen peroxide.
All you need to do is to use a rag and wet it with either of these two agents in order to rub away rust.
If that doesn’t do the trick, try making a paste of baking and water.
Cover the rusted spots and allow the paste to settle for at least 20 minutes.
Finally, scrub and rinse off the residual.
Even natural cleaning agents such as lemon juice and salt can do the trick for you.
The steps are simple and can be expedited easily even by a newbie.
Spray the rusted area with lemon juice and then sprinkle with salt.
Allow it to settle for 15 minutes and then scrub off the residual.
The entire steps of cleaning using baking soda and lemon juice have already been explained earlier in this post.
How to Keep Your Shower Door Clean
- First and foremost, you need to wipe out the tracks after your shower
- It will not take more than a couple of minutes to keep the mildew away
- And, the best part is, it will help you to make sure that the doors continue to slide easily
- Check the caulking around the tracks to ensure that there were small spaces left for the water to drain
- If there don’t seem to be, make a few notches with an X-Acto knife to solve the problem
- Follow a regular cleaning schedule
- We recommend cleaning your shower door on a weekly basis
- In order to make your shower door more efficient when it comes to enhancing the capability to resist dirt and damage, you need to run a bar of paraffin wax over the track
Benefits of Cleaning Your Shower Doors
It goes without saying that a sparkling clean shower door will enhance the look and feel of your bathroom as a whole.
Definitely, it will beautify your bathroom and makes it look cleaner as well.
Trust me, by removing black mold from your shower door track you’ll drastically reduce the element that may cause allergy.
It’s A Wrap
First and foremost, I would like to thank you for being with us till the end.
Secondly, I would like to bring to your notice that I along with my core team have put loads and loads of effort into coming up with this idiosyncratic superlative piece of information on the topic, how do you get black mold off your shower door track?
And, in case, you liked our effort and want to appreciate us then please do share this post with like-minded people and the ones who are in search of similar pieces of information.
After all, sharing is caring, isn’t it?
Long story short, we’ve tried to the best of our capabilities to provide you with the needed information on the given topic in order to help you in making an informed decision.
That’s all, as of now:):)